Touch Up Painting

Updated on April 11, 2024

FINISHING THE JOB FOR A PROFESSIONAL APPEARANCE

Panel cuts resulting in exposed polyurethane must be coated to prevent discoloration. The NextStone™ Touch Up Kit contains touch up paint, instructions and brushes. Each kit is specific to the panel colors and rock profile.

Step 1

Inspect the job closely for any nicks, scratches or exposed cut edges of panels and apply the appropriate touch-up paint. Some applications may require caulking which should be concealed with touch-up paint. Any areas where deviation from standard NextStone™ installation practices is required must be caulked and touched up.

Step 2

NextStone™ touch up paint is latex based and can be cleaned using warm, soapy water. Clean hands, spills and tools immediately after use. The paint has been thinned to be used with the spray gun however if additional thinning is necessary, it can be done by adding water. Protect paint from freezing by keeping at room temperature.

Step 3

Touch Up paint can be applied by using the brush provided. Be sure to shake bottles well before using.

Was this document helpful?

Canadian distributor of Nextstone™

Sample Rebate Requirements

Please fill out the information below. You will receive an email from the Nextstone Corporate Office asking you to submit proof of purchase of the Nextstone product (not samples) from your retailer or dealer spending a minimum of $200.00 within 30 Days of the sample purchase. Upon verification, rebates will be processed. Rebate transaction may take up to 30 days for processing. 

NextStoneTM

Our Commitment

Nextstone is dedicated to superior product quality and exceptional customer service, ensuring your home’s aesthetic is enhanced with our stonework. Experience unrivaled excellence with Nextstone—where your satisfaction is our priority.

How Can We be of Assistance?

© 2024 -NextStoneTM. All Rights Reserved

Connect With Us

Tel: 303-371-8232  |  TF: 1-866-371-8232

Fax: 720-294-0221

PO Box 39914 – Denver, CO 80239

© 2024 -NextStoneTM. All Rights Reserved